An FC Luzern DLS kits URL is a direct link to a 512×512 PNG Luzern shirt that you paste into Dream League Soccer. All four slots are below, and each file was loaded into the game before it was listed here.

FC Luzern Logo
Official Logo 512×512 (2026/27)

FC Luzern Home Kit
Home Kit 512×512 (2026/27)

FC Luzern Away Kit
Away Kit 512×512 (2026/27)

FC Luzern Third Kit
Third Kit 512×512 (2026/27)

FC Luzern GK Home Kit
GK Home Kit 512×512 (2026/27)

FC Luzern GK Away Kit
GK Away Kit 512×512 (2026/27)

FC Luzern GK Third Kit
GK Third Kit 512×512 (2026/27)
The anniversary home makes one small change to Luzern’s usual look, but in DLS that change has a much bigger effect than it does on the real shirt.
Swapping white for gold costs contrast
Luzern released its 125th anniversary home kit in May 2026, debuting it in the final home match against FC Zürich. The usual white details were replaced with gold for the jubilee season, with Erreà producing the shirt and Otto’s remaining the sponsor.
Which is a straight downgrade for this game
White on blue is about as easy as a kit can get for DLS. The colours have a large value difference, so the trim, branding and other small details remain easy to separate.
Gold does not behave the same way.
Once a metallic gold finish is reduced to a flat 512×512 image, it becomes ordinary yellow-gold. Against Luzern’s blue, that gives you a moderate contrast rather than the maximum contrast you get from white.
That means the anniversary trim, collar, cuffs and branding naturally look softer than they would on the traditional white-detailed version.
That is not a bad file. It is a limitation created by the colour choice.
And the effect compounds on small elements
A narrow detail can survive when it has enough contrast. White piping against blue is easy. Gold piping against blue is much closer to the limit.
That makes the trim the first place I would inspect on a Luzern home file.
Open the image at full size and follow the narrow gold elements around the shirt. If they are already weak or muddy there, they will not improve once DLS reduces the shirt to its in-game scale.
Also confirm that the file is genuinely 512×512 rather than an enlarged copy.
Lugano’s black piping on white and Pachuca’s white lines on navy have much more room to survive. Luzern’s gold sits below both.
Worth knowing before you choose a file
If readability is your priority, an older Luzern home with white detailing is actually the better DLS option.
The game does not care whether the design is current. Any working 512×512 kit URL can be imported, so there is no technical reason to choose the anniversary shirt if you prefer the stronger contrast of the older version.
That is one of those cases where the newest shirt is not necessarily the best one to play with.
Visibility
Luzern’s blue separates cleanly from the green pitch, so there is no major problem with the base colour disappearing.
The issue is what happened to the brightest part of the shirt.
Replacing white with gold makes the anniversary version read as a darker shape from a distance. That was clearly intentional in the real design, but it makes the players slightly harder to follow in DLS.
Use white numbers on the home. Since the shirt itself no longer provides a strong white detail, the number becomes the brightest element on the back.
There are two anniversary shirts
This is worth checking before you download anything because the names overlap.
The 125th anniversary home was released in May 2026 and is the shirt used throughout the league season.
A separate 125th anniversary special kit was then worn for the official jubilee match against FC Lausanne-Sport on 22 August 2026, complete with dark navy shorts and socks.
Which means a file labelled “Luzern 125th anniversary” could be either
Do not trust the filename alone.
Compare the actual design with the kit card above. The league home and the one-off jubilee shirt are different products, even though both can appear under the same anniversary wording.
The home is the regular season option. The jubilee shirt was created for one occasion, so there are naturally fewer files circulating for it.
If that special shirt is the one you want, it is worth finding a working URL sooner rather than later.
Servette has a similar naming problem this season with two shirts both described as the away, while Alianza Lima and New Zealand have had their own versions of the same issue.
The third is gold and navy
Released on 26 June 2026, the third kit uses gold and navy in a much plainer design.
Gold on navy is a middling outcome
The same gold problem applies here, only with the colours reversed.
Flat yellow-gold is lighter than navy, so the two colours still separate properly. But it is nowhere near the contrast gold gets when placed against black.
Gold on black, such as Pasto’s example, survives extremely clearly. Gold on claret, as on Tolima, remains strong. Luzern’s gold on navy is more muted. Gold on white, like Zürich, barely registers, while gold against mint, as on Austria, can disappear almost completely.
So the Luzern third should look correct, but expect it to look flatter and less impressive than the real shirt.
And a plain design gives you no test
There is no texture, gradient or complicated pattern here.
That makes the kit easy to reproduce, but it also creates a problem when checking files: a poor 512×512 file can look just as convincing as a good one.
Use the details that should remain defined instead.
Check the collar, cuffs, crest, Erreà branding and Otto’s sponsor, then confirm the dimensions.
Those give you a much better quality check than simply looking at the overall shirt.
Visibility
Gold works better as the main colour.
The flat yellow-gold sits comfortably away from the green pitch, while the navy gives the shirt enough internal contrast to define its shape.
That makes the third the most readable kit in the current Luzern range, even though its gold will still lose the metallic quality of the real shirt.
Use navy or white numbers depending on the exact area they sit against.
But expect fewer files
The third kit was not especially well received by supporters, which matters when you are looking for a clean 512×512 version.
Less popular kits generally attract fewer people making and uploading kit files.
Austria’s away, Parma’s third, Banfield’s orange third and Beşiktaş’s away have faced similar availability problems.
The away
Luzern’s 26-27 away was released during summer 2026, after the anniversary home and before the third.
Rather than trusting a filename or description, compare the file directly with the card above.
The basic checks are straightforward:
Any boundary between two colours should be sharp rather than smeared.
Collar and cuff trim should have clean edges.
The Erreà branding, crest and Otto’s sponsor should remain crisp.
Confirm the image is actually 512×512.
If the away also carries gold detailing, apply the same rule as the home and third: expect the gold to look flatter and slightly muted, and inspect the trim carefully because it is both part of the design and one of the weaker elements at this resolution.
Which FC Luzern kit survives best?
The home is a blue shirt with gold anniversary details. Its main weakness is the gold trim, which is the part most likely to soften in a weak file. It remains adequately visible in play, but the older white-detailed version has the stronger contrast.
The away should be judged against its actual card. Its reproduction quality depends on the specific details shown there.
The third is the simplest technically. Gold and navy give it enough contrast, and the plain construction leaves little for 512×512 to destroy. It is also the most readable of the current range.
How to tell if an FC Luzern file is current
Four checks will settle most Luzern kit searches.
First, look for gold instead of white on the home. That is the clearest marker of the 26-27 anniversary design.
Second, check for Erreà branding and Otto’s as the sponsor.
Third, the current third should be gold and navy.
Finally, make sure you know which anniversary shirt you are looking at. The league home and the one-off jubilee kit can both appear under similar names.
The first check does most of the work. A blue Luzern shirt with white trim belongs to an older cycle rather than the current anniversary home.
How to use an FC Luzern DLS kits URL
Copy the image URL using the copy button on the kit card, not the address shown in your browser. The browser address often leads to the webpage containing the image rather than the image file itself.
In Dream League Soccer, open My Club → Customise → Kit. Do not use Logo; the badge has its own section.
Choose the kit slot before pasting the link because whatever slot is selected is the one that will be replaced.
Press and hold the URL field, tap Paste, then choose Confirm. Older versions of DLS may show Download instead.
The three outfield kits fill the three normal slots. The goalkeeper slot remains separate. If you find the one-off jubilee shirt, it can be worth using one of those slots for it. An older white-detailed home is also a sensible choice if readability matters more than having the latest design.
The first custom kit requires the one-time gem unlock. After that, changing the kit is free.
Test the link first
Always open the URL in a browser before putting it into the game.
The image should appear by itself, without a page, buttons or other content around it. Ideally, the address should end in .png.
A page containing the shirt is not the same thing as a direct image URL. DLS needs the actual image file.
For the anniversary home, use the gold trim as your visual test. It is the fragile part of the design, so softened gold is a warning sign.
The third is harder to judge visually because its gold-and-navy construction is so simple. Check the dimensions and make sure the Erreà branding, crest and sponsor are properly defined instead.
Why do FC Luzern kit URLs stop working?
There are three common causes, and the obvious one is not always the real problem.
Free image hosts can delete files. Old uploads may be removed after months or years while the original page or reference remains. Luzern is a mid-sized Swiss club, and the Swiss Super League does not generate the same volume of kit uploads as the biggest European leagues. That means there are fewer replacement URLs available.
The one-off jubilee shirt carries the highest availability risk because relatively few people will have created versions of it. The poorly received third is another kit where you should expect fewer options.
Hotlink protection is another issue. A host can allow the image to load in a browser while blocking requests coming directly from another application. That is why a URL can work when you click it but fail when you paste it into DLS.
The third problem is a preview/direct-file mismatch. A website may display a thumbnail from one location while giving you a URL that points somewhere else. The preview can remain visible even after the actual file has disappeared.
Here, the shirt shown and the URL copied are the same file on the same server.
The FC Luzern badge
Set the badge in the same session by opening My Club → Customise → Logo rather than Kit.
Luzern’s crest uses the club’s blue and white with the city’s heraldic elements.
DLS crops imported badges into a circle, so leave enough clear space around the artwork. A badge that is cropped tightly to the edges can lose part of its design after the circular crop.
Blue against white gives the crest strong contrast and works well at the small size used in-game.
There is also the possibility of a 125th anniversary crest. If you are matching the anniversary shirt, a commemorative version may fit the theme better. But a standard blue-and-white crest will usually remain easier to read because the colour blocking is stronger.
Fiorentina, Alianza Lima, Sporting CP and Marseille are other clubs with crest variants worth checking this season.
Keeping your FC Luzern kits
Custom kits are saved on your device rather than tied to your account.
An ordinary game update may leave them intact, but reinstalling the game or moving to another phone can remove the kits and badge.
Save the four URLs somewhere outside DLS before changing anything.
For Luzern in particular, also write down which anniversary shirt you used. The league home and the one-off jubilee shirt can share almost identical wording while referring to different designs.
FAQ FOR RANK MATH
What is an FC Luzern DLS kits URL?
A direct link to a 512×512 PNG Luzern shirt that you paste into Dream League Soccer’s kit screen. A proper direct image URL should end in .png.
What changed on the 26-27 Luzern home kit?
The traditional white details were replaced with gold for the club’s 125th anniversary season, creating a darker and more elegant look.
Does the gold change matter in DLS?
Yes. White against blue gives much stronger contrast, while metallic gold becomes flat yellow-gold in the image and only gives moderate contrast against blue. The gold trim is therefore the first part of the shirt likely to soften.
Should I use an older Luzern home instead?
If readability is your priority, yes. DLS accepts any working 512×512 kit URL, regardless of the design’s age, and the older white-detailed version gives you stronger contrast.
Why are there two FC Luzern 125th anniversary kits?
The May 2026 anniversary home was used during the league season. A separate special anniversary shirt was worn for the jubilee match against FC Lausanne-Sport on 22 August 2026. Always compare the actual design rather than trusting the filename.
Does the gold-and-navy third kit work well in DLS?
Reasonably well. Gold remains clearly separated from the pitch, while navy provides internal contrast. The main compromise is that the gold will look flat rather than metallic.
Why might the Luzern third have fewer available files?
It received a relatively poor response from supporters, and less popular kits generally attract fewer people creating 512×512 versions.
What number colour should I use on the home?
White. The anniversary shirt no longer has the strong white detailing of the traditional design, so white numbers provide the brightest contrast on the back.