An AGF Aarhus DLS kits URL is a direct link to a 512×512 PNG AGF shirt you paste into Dream League Soccer. All four slots are below, with each file loaded into the game before it was listed here.

AGF Aarhus Logo
Official Logo 512×512 (2026/27)

AFG Aarhus Home Kit
Home Kit 512×512 (2026/27)

AFG Aarhus Away Kit
Away Kit 512×512 (2026/27)

AFG Aarhus Third Kit
Third Kit 512×512 (2026/27)

AFG Aarhus GK Home Kit
GK Home Kit 512×512 (2026/27)

AFG Aarhus GK Away Kit
GK Away Kit 512×512 (2026/27)

AFG Aarhus GK Third Kit
GK Third Kit 512×512 (2026/27)
The third kit uses two colours that sit almost on top of each other in value, putting it at the light-end extreme of low contrast.
Sand on cream is the light-end worst case
AGF’s 26-27 third and European kit, designed by Craft, uses a vintage-inspired sand-and-cream palette. The design pays tribute to the club’s 1880 founding as a gymnastics association, under the campaign motto “En Gymnastikforening I Europa.”
Which is almost no contrast at all
Sand and cream are both pale warm neutrals. They sit very close together on the value scale, and neither has enough hue separation to rescue the other.
This site has previously treated black-on-navy as its lowest-contrast pairing at the dark end, on Minnesota United’s home.
Sand on cream creates the same problem at the opposite end.
The important point is not whether the colours are dark or light. When their value difference approaches zero, compression has very little information to preserve.
So expect a plain cream shirt
Whatever form the two tones take — panels, trim, graphics or a vintage treatment — most of that distinction should disappear.
That is a contrast limitation, not evidence of a bad file.
A stronger source cannot manufacture contrast that the original design does not have.
And the 1880 tribute goes too
A shirt built around a founding date and historical motto usually carries that information as text or a small graphic. DLS gives those details very little room to survive.
On the chest, the imported badge can cover it. On the upper back or neck, it competes with the lowest-resolution areas and the squad number. At the hem it becomes extremely small, while anything placed inside the collar is outside the mapped surface altogether.
So the historical concept can disappear even when the file itself is perfectly good.
Fiorentina’s centenary mark, Nacional’s collar inscription, Columbus’ founding tribute and Unión de Santa Fe’s 1996 reference face the same limitation.
What to check instead
Check the Craft branding, crest, Ceres and Sparekassen Danmark sponsors.
Those are the defined elements with enough contrast to tell you whether the file is actually sharp.
Confirm the dimensions as well. On a computer, right-click the image and open it in a new tab; the browser will report the actual image size.
Number colour matters more than usual
Dream League Soccer takes number colours from the two small swatches on the kit template rather than from the image itself. One controls shirt numbers and the other controls shorts numbers.
White numbers on cream are nearly invisible. Yellow or gold is not much better.
Use navy or black so the number has a genuine value difference from the shirt.
Visibility
DLS renders players relatively small, so the base colour needs to separate from the pitch.
Cream is a pale warm tone and separates reasonably well from pitch green, although it is slightly less bright than pure white.
The problem is what happens inside the shirt. Once the sand detailing disappears, the third becomes almost one flat cream shape.
The squad number ends up doing much of the visual work.
The home’s pinstripes are the opposite case
Released on 11 June 2026, AGF’s home is white with navy pinstripes, with Ceres and Sparekassen Danmark as sponsors.
Which is contrast at its best
Navy against white is maximum contrast.
That puts AGF’s home alongside the pinstripe designs that survive well at 512×512: Argentinos Juniors, Heidenheim’s third, Boca Juniors’ away and Unión de Santa Fe’s special shirt.
The pattern is consistent. Strong colour separation survives; tonal or metallic striping does not.
But survivors survive on a knife edge
A pinstripe is about as thin as a stripe can become.
A genuine 512×512 file can still preserve the individual navy lines. An enlarged or poorly compressed source can turn them into a pale grey wash.
Open the home at full size and look closely at the stripes.
If you can distinguish the individual lines, the file is doing its job. If they have merged into a wash, the source is too small.
That makes the home the best quality gauge in the AGF range. The third cannot give you the same information because its own palette removes most of the visual distinction.
And the home is the one to play in
White is the brightest base available, while the navy pinstripes give the shirt useful internal contrast.
The result should be the easiest AGF kit to follow at match distance.
For numbers, navy or red are the practical options. White would disappear into the white areas, while navy can become difficult against the stripes. A third colour is safest if the back uses the same pinstripe treatment heavily.
Two kits, two lessons
AGF’s home and third make a useful comparison because both belong to the same season and manufacturer while producing almost opposite results.
Home: thin elements + maximum contrast → the lines survive and test your file
Third: larger elements + minimal contrast → the design disappears and tells you very little about file quality
That shows why width and contrast are separate problems.
A thin line with strong colour separation can survive better than a broad area with almost no value difference.
Use the home pinstripes to judge the quality of your source, then apply that judgement to the third.
The away
AGF’s 26-27 away was released alongside the rest of the range and is also made by Craft.
Compare the file with the kit card rather than relying on a written description, then check the usual structural details:
Colour boundaries should remain sharp rather than smeared.
Collar and cuff trim should have clean edges.
Craft branding, crest and sponsors should be crisp.
The image should be the correct dimensions.
And watch for a chest band
AGF used a different construction on the 25-26 third, which featured a green-and-white chest band.
A green-on-white band has enough contrast to survive, but the horizontal construction creates six alignment points: two side seams and two sleeve junctions, along with the band edges that have to remain level around the body.
Import it and inspect the shirt from the side.
A band can look perfectly straight in the flat image and still step when the kit is wrapped onto the DLS model.
Olimpia’s franja, St. Gallen’s green band, Boca’s yellow band and Sion’s 25-26 third present the same problem.
Which AGF Aarhus kit survives best?
The home is the strongest technical choice. Its white base and navy pinstripes provide both visibility and a useful file-quality test.
The away should be judged from its card, with particular attention to its colour boundaries, trim and logos.
The third is the weakest visual test because its sand-and-cream palette removes most of its own detail. The shirt can still be a perfectly good file even when the vintage treatment is barely visible.
The third is also the European kit
This saves you from searching for another version.
AGF’s third and European shirt are the same kit, released together.
Unlike clubs that produce separate European variants such as Thun, Basel, Lausanne-Sport and Union Saint-Gilloise, there is no second AGF version that needs to be tracked down.
One file covers both.
European variants often differ mainly through crest treatment or competition patches anyway, and those details are either overwritten by DLS or too small to reproduce meaningfully.
Craft replaced Hummel
AGF moved to Craft, ending its long Hummel association.
Which gives you a clean dating check
A Hummel chevron on an AGF shirt places the file in the earlier era.
A Craft logo points to the current cycle.
That matters because Hummel supplied AGF for many years, leaving plenty of older kit files in circulation.
FC Zürich, Basel, Grasshoppers, Fiorentina and Alavés have also dealt with recent supplier changes.
And Craft are a practical manufacturer
Craft’s performance-oriented approach generally favours defined construction and flat colour over the woven jacquards, surface effects and heavy textures that are difficult to preserve in a flat 512×512 PNG.
That works in your favour.
The third is the exception here, but its problem is the palette rather than the construction.
How to tell if an AGF file is current
Four checks settle it quickly:
Craft branding rather than Hummel — the clearest supplier marker.
Ceres and Sparekassen Danmark as the sponsors.
White with navy pinstripes for the current home.
Sand and cream for the 26-27 third, while the green chest band belongs to the 25-26 third.
The Craft logo does most of the dating work, but the shirt design confirms it.
A note on the Danish season
The Danish Superliga runs across two calendar years, so AGF’s current shirts are labelled 26-27.
A file named simply “AGF 2026” could therefore refer to either the 25-26 or 26-27 set.
Check the design rather than trusting the year in the filename.
How to use an AGF Aarhus DLS kits URL
Copy the link from the button on the kit card, not from the browser address bar. The address bar normally gives you the page rather than the standalone image.
In Dream League Soccer, go to My Club → Customise → Kit. Do not select Logo; the badge is imported separately.
Choose the slot before pasting because the selected slot is the one that gets replaced. Press and hold the URL field, tap Paste, then Confirm. Older builds may label that button Download.
The three outfield kits occupy the three outfield slots, leaving the goalkeeper slot available.
AGF’s 26-27 pre-match shirt is another possible custom-kit choice if you find a working file. DLS accepts any valid 512×512 kit URL regardless of what the garment was originally intended for, although pre-match shirts naturally have fewer files available.
The first custom kit requires a one-time gem unlock. After that, changing kits is free.
Test the link first
Open the URL in your browser before entering it into DLS.
The image should appear on its own, and the address should end in .png.
If the page contains headers, buttons or other website elements around the image, it is a viewer page rather than the direct file the game needs.
For the home, use the pinstripes as the test. If individual navy lines have merged into a pale grey wash, the file is undersized.
For the third, the visual test is less useful. Sand and cream will look similar even when the file is perfectly sharp.
Check the Craft logo, crest, sponsors and dimensions instead.
Why do AGF kit URLs stop working?
Three problems account for most broken kit links.
Free image hosts can delete files. Older or unused uploads may be cleared after months or years while the URL remains in an article. Limited files such as the pre-match shirt or older anniversary designs are especially worth preserving when you find them.
Hotlink protection can also be enabled. The image may open normally in your browser because the request comes from the host itself, while DLS’s request is refused. That explains why a link can work when opened manually and fail after being pasted into the game.
The preview and direct file can be different files. A website may display a thumbnail from one location while its copy button points somewhere else. The page can continue working even after the actual kit file has disappeared.
Here, the shirt shown and the URL copied are the same file on the same server.
The AGF Aarhus badge
Import the crest separately through My Club → Customise → Logo.
AGF’s badge uses white and navy, includes the 1880 founding year and carries the gymnastics association lettering.
The four-digit year is the vulnerable detail. Small numerals soften quickly when the badge is displayed at DLS size, so use a genuine 512×512 badge file rather than enlarging a smaller source.
Navy against white is close to ideal for badge legibility because the value difference is so strong.
DLS crops every badge into a circle, so leave clear space around the full artwork rather than trimming the file tightly to the edges.
The badge is particularly important on the third because so much of the shirt’s own sand-on-cream detailing disappears. The crest becomes one of the few sharply defined elements remaining on the shirt.
St. Gallen, Union Saint-Gilloise and Lausanne-Sport have a similar issue with founding years in their crests.
Keeping your AGF kits
Custom kits are stored on your device rather than in your account. Updating the game usually keeps them, but reinstalling it or changing phones can remove the saved kits and badge.
A home file where the pinstripes remain clearly separated is worth keeping. It is both the strongest-looking AGF kit and the most useful source-quality check.
Save all four URLs in a notes app before importing them, and record the season beside each one.
FAQ FOR RANK MATH
What is an AGF Aarhus DLS kits URL?
A direct link to a 512×512 PNG AGF shirt that you paste into Dream League Soccer’s kit screen. A working direct image link ends in .png.
Why does the third kit’s design disappear?
The sand and cream colours sit extremely close together in value and have little hue separation. With almost no contrast between them, the finer distinction is easily merged at 512×512.
Is that necessarily a bad file?
No. The palette itself is the limitation. Judge the third by its Craft branding, crest, sponsors and image dimensions rather than expecting the sand detailing to appear strongly.
Does the 1880 tribute survive?
Most of it will not. Small historical text or marks are either too fine, covered by the imported badge, located near the number area, placed at the hem, or inside the collar where DLS does not map the surface.
Do the home kit’s pinstripes survive?
Yes. Navy against white provides maximum contrast, but the stripes are extremely thin. A genuine 512×512 file should keep them distinct; an undersized or enlarged file can turn them into a grey wash.
Which AGF kit is best for playing?
The home. Its white base is highly visible and the navy pinstripes provide clear internal contrast, while the third can appear almost like a plain cream shirt.
What number colour should I use?
Use navy or red on the white home, and navy or black on the cream third. White on cream is very difficult to see, while gold or yellow is also weak.
Is there a separate European AGF kit?
No. The 26-27 third and European shirt are the same kit, so one file covers both.
How can I tell the current AGF kit from an older one?
Look for Craft rather than Hummel, then confirm the current sponsor combination and design. The white-and-navy pinstriped home and sand-and-cream third belong to 26-27, while the green-and-white chest band belongs to the previous 25-26 cycle.