Melbourne Victory DLS Kits and Logo URL 512×512 | 2026/27

A Melbourne Victory DLS kits URL is a direct link to a 512×512 PNG Victory shirt you paste into Dream League Soccer. All four slots are below, with each file loaded into the game before it went on this page.

The home kit puts two elements in the same chest zone, but the game treats them very differently.

The chevron survives, the logo above it does not

Released in October 2026 as Melbourne Victory’s first kit by Elite Eleven, the home keeps the club’s traditional colours in a deliberately classic design. Elite Eleven’s signature logo sits centrally above the chevron, with Turkish Airlines as the primary shirt sponsor.

Which puts two things in the badge zone

Dream League Soccer draws your imported crest on the chest, over whatever the file has there.

That creates a specific problem for the Elite Eleven logo.

A centred manufacturer logo sits directly in the badge’s path. Most kit brands put their logo on the right chest or sleeve, where the imported crest leaves it alone. A centred logo does not get that luxury.

Expect the Elite Eleven mark to be covered, either completely or in part.

But the chevron continues past it

This is where Victory’s design works particularly well.

The chevron radiates outward from the chest, continuing toward both shoulders and down toward the lower part of the shirt.

So when the badge covers its apex, you lose the centre point but retain both arms of the V.

That makes the chevron one of the better chest motifs for DLS. The same principle applies to Lugano and Vélez: a large V can survive a badge because its shape continues beyond the area being covered.

Horizontal bands such as Boca’s or Brøndby’s continue sideways. Minnesota’s sash continues diagonally. A centred wordmark, by comparison, simply gets covered.

Victory’s big V has been part of the club’s identity since 2005, and its shape is unusually well suited to the game.

And the contrast decides how strongly

If the chevron is white on navy, you have the maximum possible value difference. The V should remain sharp at practically any useful viewing distance.

If it is silver, expect something weaker.

Silver becomes flat grey in a flat image. Its metallic appearance depends on how the surface reflects light, and the PNG has no physical surface to reproduce that behaviour.

Grey against navy is still visible, but it does not have the punch of white against navy.

Udinese’s metallic pinstripes, Angers’ silver-on-white treatment and Al-Ittihad’s gold piping face the same limitation.

Open the home at full size and identify which treatment your file actually contains.

What to check

Start with the chevron edges. Given the contrast, they should be clean and sharply defined.

Then check the Turkish Airlines sponsor. Because the crest occupies the same chest area, judge the sponsor by the portions outside the badge rather than expecting the centre to remain visible.

Finally, confirm the dimensions. On a computer, open the image in a new tab and check the actual size reported by the browser.

Visibility

Dream League Soccer renders players relatively small, so the base colour still matters.

Navy separates cleanly from pitch green, with little risk of blending into the grass, but it does not provide much brightness by itself.

The chevron is what saves the silhouette.

A large bright V across the chest occupies enough area to remain visible, putting Victory’s home in the same category as Wellington Phoenix’s large yellow-and-white panels rather than a dark shirt with a few bright pieces of trim.

Use white numbers on the home. On an otherwise dark shirt, the number becomes one of the strongest bright elements you can add.

The away is deliberately the opposite

Victory’s 26-27 away introduces a vibrant and modern aesthetic, deliberately contrasting with the classic home.

Which solves a problem other clubs have

You only get three outfield kit slots, so those three shirts represent almost the entire visual range of your team.

Several clubs this season have made two of those slots look too similar. Lyngby’s navy third against its blue home and Macarthur’s two dark current shirts are good examples.

Victory have avoided that problem.

A classic navy home paired with a vibrant away gives you genuine visual separation.

Put the two source images beside each other at thumbnail size anyway. If they remain clearly different there, they will almost certainly serve different purposes in-game.

What to check

Compare the away against the card above and run the same structural checks:

Colour boundaries should be sharp rather than smeared.

Collar and cuff trim should have clean edges.

Elite Eleven branding, crest and sponsor should remain crisp.

Confirm the dimensions.

Also check the manufacturer logo’s position. If Elite Eleven is centred on the away as well, your imported badge will cover it.

Elite Eleven have never made a kit before

Melbourne Victory announced a four-year deal with Elite Eleven, a Melbourne-born activewear brand, replacing Macron from 26-27.

This is the brand’s first-ever technical football kit partnership.

Which is good news for your file

A new football manufacturer does not arrive with a long catalogue of elaborate construction techniques.

There are no jacquard weaves, 3D knits or embossed reliefs to worry about here. Those are physical effects that live in the fabric and cannot be carried by a flat 512×512 image.

Instead, expect flat colour, defined panels and printed graphics.

That is exactly what DLS handles best.

Union Saint-Gilloise with O’Neills, Adelaide with UCAN, Lyngby with Select, Wellington with Dynasty and the Mariners with Konqa operate under the same basic advantage: simpler construction generally means a more faithful flat image.

Macron’s 26-27 range is the opposite example, with 3D-knit jacquard fabrics that cannot be reproduced physically in a PNG.

So for DLS, the move away from Macron is a positive one.

And the four-year term is unusually useful

The Elite Eleven agreement runs through 2029-30.

That means an Elite Eleven logo should remain a strong current-season marker for four seasons, giving you an unusually long dating window.

A Macron logo points to 25-26 or earlier. Elite Eleven points to the new era beginning in 26-27.

Brisbane Roar’s three-year Kelme agreement is a useful comparison, but most clubs do not make recent dating this easy.

With the usual trade-off

There is one downside.

A brand with only one football client naturally generates less kit coverage than an established global manufacturer.

So even though Melbourne Victory are one of the A-League’s better-supported clubs, the first Elite Eleven season may produce fewer available files than you would expect.

If you find a working URL, save it.

Which Melbourne Victory kit survives best?

The home is technically strong because the navy-and-chevron construction gives the shirt a large, defined shape. The centred Elite Eleven logo is the part you should expect to lose under the imported badge.

The away should provide the better visual contrast between slots because Victory deliberately made it vibrant and modern rather than another dark variation.

For a three-slot collection, that contrast is valuable.

How to tell if a Victory file is current

Four checks settle it quickly:

Elite Eleven branding rather than Macron — the clearest current marker and useful through 29-30.

Turkish Airlines as the primary sponsor.

A vibrant, modern away paired with the deliberately classic home.

Compare the design against the cards above, because the navy chevron itself can resemble earlier Victory shirts.

The first check does almost all the dating work.

A note on the A-League season

The A-League runs across two calendar years, with its Australian summer season extending from October into May.

That is why Victory’s current collection is labelled 26-27 rather than simply 2026.

The club released the new collection in early October, later than many European clubs.

So a file labelled only “2026” could refer to either set.

Check the supplier logo. It settles the era faster than the design does.

How to use a Melbourne Victory DLS kits URL

Copy the direct image URL using the button on the kit card rather than copying your browser’s address bar. The browser address usually points to the page containing the image instead of the image file.

In Dream League Soccer, go to My Club → Customise → Kit. Do not choose Logo; the badge is handled separately.

Select the slot before pasting because the selected slot is the one that gets replaced. Press and hold the URL field, tap Paste, then Confirm. Older builds may call that button Download.

With the home and away installed, the third slot remains free.

Victory’s 2025 20th-anniversary collection, also made by Elite Eleven, is a natural candidate, as are older Macron or Adidas designs. DLS accepts any working 512×512 URL regardless of the shirt’s age.

Because the home is navy-based, a brighter third is the more useful choice.

The first custom kit requires a one-time gem unlock. After that, changing kits costs nothing.

Test the link first

Open the URL in your browser before putting it into the game.

The image should appear by itself, without headers, buttons or a gallery around it, and the address should end in .png.

A viewer page is not a direct image file and cannot be used as a DLS kit URL.

For the Victory home, inspect the chevron edges. They are the most defined visual element on the shirt and therefore the best quality check.

Do not use the Elite Eleven logo as your main test. A centred manufacturer logo is going to be covered by your imported badge anyway.

Why do Victory kit URLs stop working?

Three problems account for most dead kit links.

Free image hosts delete files. Old uploads can disappear after months or years while the page containing the URL remains online.

Melbourne Victory are one of the better-supported A-League clubs, which should help file availability, but Elite Eleven are brand new to football and do not yet have an established kit-making community around them. The first season of the deal may therefore have fewer files than expected.

Hotlink protection can block DLS. A host may allow the image to load normally in a browser while refusing a direct request from the game. That is why a URL can work when clicked but fail after being pasted into DLS.

The preview and direct file can be different. A page can display a thumbnail from one server while its copy button points to an image stored somewhere else. The preview continues working even after the direct file disappears.

Here, the shirt displayed and the URL copied from the card are the same file on the same server.

The Melbourne Victory badge

Set the crest during the same session by returning to My Club → Customise and choosing Logo instead of Kit.

Victory’s crest carries the club’s navy, white and silver, centred around the large V that defines the club’s identity.

A V is an excellent shape for DLS.

It is bold, angular and easy to recognise, with hard edges and little fine detail to lose when rendered beside the score.

It also echoes the shirt itself. The home chevron is essentially the crest’s defining V expanded across the front, so the imported badge reinforces the shirt rather than fighting its main design.

Silver is the weak point.

As with the shirt, metallic silver becomes flat grey in a PNG. If you have a choice of badge files, one where white carries the strongest contrast will usually read better than one relying heavily on silver.

The game crops every badge into a circle, so use a file with some clear space around the complete artwork rather than one trimmed tightly to its edges.

Universidad de Chile, Croatia, Juárez, Heidenheim and Necaxa benefit from the same basic advantage when the badge shape and shirt identity reinforce one another.

Keeping your Victory kits

Custom kits are stored on your device rather than in your account. Updating the game usually leaves them in place, but reinstalling the game or changing phones can remove the kits and badge.

The Elite Eleven agreement runs through 2029-30, so the supplier marker you save now should remain useful for four seasons.

Still, save the actual URLs as well.

Paste all four links into a notes app and label the home, away, third and goalkeeper files. That is much easier than trying to reconstruct the collection after a reinstall.

FAQ FOR RANK MATH

What is a Melbourne Victory DLS kits URL?

A direct link to a 512×512 PNG Victory shirt that you paste into Dream League Soccer’s kit screen. A working direct image link ends in .png.

Does the Victory chevron survive the imported badge?

Yes. The badge covers the apex of the V, but the chevron continues outward toward the shoulders and remains clearly readable. It is one of the better chest designs for DLS.

What happens to the Elite Eleven logo?

It is covered because the manufacturer logo is centred directly above the chevron, in the same area where DLS draws your imported crest.

Will a silver chevron look as good as a white one?

No. Silver becomes flat grey in a PNG because the metallic effect depends on surface reflection. White against navy provides maximum contrast, while grey against navy is considerably softer.

Does Elite Eleven make these kits easier to reproduce?

Yes. The supplied material describes the new range as relying on flat colour, defined panels and printed graphics rather than jacquard, 3D knit or embossed construction. Those simpler elements translate well to a 512×512 image.

How long will an Elite Eleven logo stay current?

Through the 2029-30 season. Melbourne Victory’s deal runs for four years from 26-27, making the supplier a particularly useful dating marker.

What number colour should I use?

White on the navy home. It provides the strongest bright contrast against the dark shirt.

Do the home and away look different enough?

They should. Victory deliberately made the away vibrant and modern against the classic navy home, giving the two outfield slots genuinely different visual roles.

Leave a Comment