FC Juarez Bravos DLS Kits and Logo URL 512×512 | 2026/27

An FC Juárez DLS kits URL is a direct link to a 512×512 PNG Bravos shirt that you paste into Dream League Soccer. All four slots are below, and each file was loaded into the game before it was added to this page.

Green is normally one of the worst base colours you can use in DLS. Juárez is an exception, and the reason comes down to the exact shade rather than the colour name itself.

Radioactive green beats the green rule

The 26-27 home kit, made by Joma, uses a radioactive slime green base with black splashes and a subtle Juárez cross pattern woven into the fabric. The club crest sits directly in the centre of the chest.

Saturation matters more than hue

Dream League Soccer displays players at a relatively small size, so the important question is how far the shirt colour separates from the grass.

Green is usually the hardest base colour to use because the pitch is green too. But that does not mean every green performs badly. What matters is how bright and saturated the shade is, rather than simply whether it is technically green.

Juárez’s radioactive slime green separates strongly from the pitch and is the best green case covered here. Vivid greens such as Schalke and Seattle’s lime shades also separate well, while mint kits such as Monaco and Austria rely more on brightness. Emelec’s petrol green is adequate, whereas grass green, like Nacional’s, is the worst-case scenario.

A radioactive green is about as far from a natural grass tone as green can get. It is intensely saturated and much brighter than the pitch, so it immediately reads as a shirt rather than blending into the field.

That makes Juárez’s home one of the more readable green kits in Liga MX, despite green normally being a problem colour in the game.

The black splashes help too

Black against radioactive green gives you strong contrast, and the irregular splashes break up the silhouette instead of leaving the shirt as one flat block of colour.

There is one limitation, though. Because the splashes are irregular by design, blur is difficult to distinguish from the intended effect. The shapes will survive, but they are not a particularly useful way to judge whether one file is higher quality than another.

Brushstroke and tie-dye kits create the same problem.

For the home, black or white numbers both work.

The woven cross pattern will not appear

The home shirt also has a Juárez cross pattern woven into the fabric.

Why that means two things are lost

Woven means construction rather than a simple printed graphic. The pattern is created through the way the fabric threads are arranged, while a flat 512×512 image has no physical surface or threads to reproduce that effect.

The second problem is that the pattern is described as subtle. Even if the game could reproduce the fabric effect, there would not be much contrast to begin with.

So expect the imported kit to look like a clean radioactive green shirt with black splashes. A better file cannot bring the woven cross back.

The same principle applies to Marseille’s woven chassis, Croatia’s woven away design, Venezia’s jacquard third, Brazil’s knit detailing and Monaco’s embossed monogram. These effects disappear because the imported image is flat.

The centred crest actually suits DLS

This is worth pointing out because it is unusual.

Juárez place their club crest in the centre of the chest rather than in the usual left-chest position.

Dream League Soccer places your imported badge on the chest in that same central area.

The game and the real shirt agree

Most badge advice on DLS kit pages is about avoiding a collision between the imported crest and something already printed on the shirt, such as a sash, monogram, chevron or anniversary graphic.

Juárez is different.

The shirt’s own layout already matches where DLS puts the badge.

Use the standard full-colour Juárez crest and the kit should retain the intended central-badge appearance.

Universidad de Chile’s away and Croatia’s checkerboard badge are the other cases covered here where the badge position lines up with the club’s own shirt design.

The away kit hides a horse

The 26-27 away kit combines red and cream and features a subtle but striking horse illustration across the front. It is finished with a polo collar.

The horse may not survive the 512×512 conversion

The problem is the word subtle.

An illustrated horse relies on fine lines, curves and smaller details rather than large blocks of colour. Those are exactly the kinds of details that a 512×512 file can lose.

The result depends heavily on contrast:

If the horse is drawn boldly in a colour that clearly differs from the base, some of it should survive in simplified form.

If it is rendered tonally within the red or cream, it is likely to disappear.

Open the away kit at full size before importing it. If you can clearly identify the horse on the flat image, there is a reasonable chance that something will remain. If you have to search for it, it is unlikely to read in the game.

Your badge lands on the horse

The horse is positioned on the front of the shirt, which is also where Dream League Soccer places your imported crest.

That means even if part of the illustration survives, the badge will cover some of it.

This makes the loss more noticeable than it would be with a normal stripe or sash. A stripe can continue around a badge and still make sense, whereas an illustration loses its meaning when part of it is covered.

The polo collar is the better quality test

The polo collar is a structural feature with a defined outline and placket, so those shapes should reproduce much more reliably.

That makes the polo collar and Joma branding more useful quality checks than the horse itself.

Also confirm the dimensions. On a computer, right-click the image and open it in a new tab so the browser can show you the actual image size.

Red and cream remain readable together

Red provides strong separation from the green pitch, while cream is a pale warm colour that still separates adequately, although it is not as bright as pure white.

Red against cream also provides genuine internal contrast, so the two colours should remain distinct on the player model.

The away kit is therefore readable, although it has less visible internal structure once the horse illustration is lost.

Use black or cream numbers, depending on which colour dominates the upper back.

Which FC Juárez kit survives best?

The home is the stronger DLS option. Its radioactive green and black splashes survive, while the woven cross disappears. It also provides the better on-pitch visibility of the two.

The away is still a good kit to use, but the horse is at risk of disappearing and is partly covered by the imported badge. Its red-and-cream colour combination remains readable.

Both teams share the home design

This is worth knowing when you search for files.

FC Juárez’s men’s and women’s sides — Bravos and Bravas — use the same home design, while each team has its own away shirt.

So a file labelled Bravas home represents the same design as a Bravos home.

The away kits are different, so check the team designation carefully before importing one.

Monterrey creates a similar situation with a women’s away shirt in a different shade.

How to tell if an FC Juárez file is current

Four checks should be enough to identify the current designs:

Joma branding: Joma took over for 25-26, so older files can carry different suppliers, including Sporelli.

Home colour: the current home should be radioactive slime green with black splashes. It is noticeably brighter than Juárez’s earlier green shirts.

Away design: the current away should be red and cream with a polo collar.

Compare the file with the kit cards above: Juárez have changed direction considerably across recent seasons.

The home’s green intensity is the most reliable check. That unusually bright radioactive shade is specific to the current design, while older Juárez shirts used more conventional greens.

How to use an FC Juárez DLS kits URL

Copy the kit link using the button on the card rather than copying the browser’s address bar. The browser address usually points to the page containing the image instead of the PNG itself.

Open Dream League Soccer, then go to My Club → Customise → Kit. Do not choose Logo, because the badge has its own separate section.

Select the kit slot you want to replace before pasting. Press and hold the URL field, tap Paste, then choose Confirm. Older versions of the game may call this button Download.

The home and away occupy two outfield slots, leaving the third slot free.

Juárez’s special shirt honouring Indios de Juárez is a strong option for that remaining slot. It is predominantly white with red details and a centred crest, evoking the city’s previous club. DLS will accept any working 512×512 URL regardless of how old the design is.

The first custom kit requires a one-time gem unlock. Once that is unlocked, changing between custom kits does not cost additional gems.

Test the link first

Always open the URL in your browser before trying it in the game.

The image should load by itself and fill the browser window, with the address ending in .png.

If you see a webpage with buttons, headers or other content surrounding the image, you are looking at a viewer page rather than the direct image file. Dream League Soccer cannot use that type of URL.

For the Juárez home, do not use the woven cross as your quality test. It will not appear regardless of the file quality. The black splashes are also not especially useful for judging resolution because their irregular appearance is part of the design.

Instead, check the collar, crest and image dimensions.

Why do FC Juárez kit URLs stop working?

Three common problems can break a kit URL, and only one of them is immediately obvious.

Free hosts can delete the image

Free image hosts sometimes remove unused uploads after months or years. The original URL can still look perfectly normal while the actual file has disappeared.

Juárez are also among the smaller Liga MX clubs, so there are naturally fewer alternative kit files than you will find for América, Chivas or Monterrey. The striking radioactive home colour has attracted more attention than the club’s size might suggest, though.

Hotlink protection can block DLS

Some image hosts enable hotlink protection. This prevents external services from requesting the image directly.

That can create a confusing situation where the image works when you click it in your browser but fails when the same URL is pasted into Dream League Soccer.

The preview and the direct file can be different

Some websites display a thumbnail hosted on their own server while the URL they provide points somewhere else. The webpage can continue showing the preview even after the actual image URL has stopped working.

For these kits, the image you see and the URL you copy are the same file on the same server.

The FC Juárez badge

Set the badge during the same session by returning to the customisation menu and choosing Logo instead of Kit.

Juárez’s crest carries the Bravos identity in green, black and white.

It matters slightly more than usual here because the real shirts place the crest in the centre of the chest, exactly where Dream League Soccer puts the imported badge. In this case, the game is reproducing the club’s own layout rather than overriding it.

Green against black and white also gives the badge reasonable contrast at the small size used by DLS.

The game crops imported badges into a circle, so leave clear space around the complete crest instead of using an image that has been cropped tightly against the artwork.

Keeping your FC Juárez kits

Custom kits are stored on your device rather than your account.

Updating the game will usually leave them in place, but reinstalling Dream League Soccer or moving to a new phone can remove them. The same applies to the badge.

Because Juárez files can be harder to replace than kits from Liga MX’s biggest clubs, save all four URLs somewhere safe before importing them. A simple notes app is enough.

FAQ for Rank Math

What is an FC Juárez DLS kits URL?

It is a direct link to a 512×512 PNG Bravos shirt that you paste into Dream League Soccer’s kit screen. A working direct image URL ends in .png.

Isn’t green a bad colour for DLS?

Usually, but Juárez is an exception. The important factors are saturation and brightness rather than hue alone. Their radioactive slime green is far enough from a natural pitch tone to separate strongly from the grass.

Will the Juárez cross pattern show up?

No. The cross is woven into the fabric, so the effect depends on the arrangement of the threads. A flat 512×512 image has no physical surface to reproduce that construction. The pattern is also described as subtle.

Will the horse on the away kit appear?

It may not. The horse is a subtle illustration made from fine lines, and those details are vulnerable at 512×512. It is also positioned on the front of the shirt, where the imported badge will cover part of it.

Does my badge cause a problem on the home?

No. In fact, the opposite is true. Juárez place their crest at the centre of the chest, which is exactly where Dream League Soccer places the imported badge. The game’s layout therefore matches the real shirt.

What number colour should I use?

Use black or white on the radioactive green home. On the away, choose black or cream depending on which colour dominates the upper-back area.

Are the men’s and women’s home kits different?

No. Bravos and Bravas share the same home design. Their away shirts are different, so check the team when choosing an away file.

Who makes FC Juárez’s kits?

Joma has made the kits since 25-26. Earlier files can feature other suppliers, including Sporelli.

Leave a Comment